Skip to main content
Dry Jersey

Stop Foundation Wall Cracks With Carbon Fiber Reinforcement

High-tensile carbon fiber straps and structural epoxy injection permanently reinforce cracked and bowing foundation walls -- stronger than steel, installed in a single day, and engineered to meet New Jersey structural requirements.

20+ Years Experience
700+ Projects Completed
Family-Owned NJ Business
5-Star Rated
Licensed & Insured
NJ HIC Licensed
BBB Accredited
QuikCrete Partner
French Drain Man Certified
EnviroBotics Authorized
20+ Years Experience
700+ Projects Completed
Family-Owned NJ Business
5-Star Rated
Licensed & Insured
NJ HIC Licensed
BBB Accredited
QuikCrete Partner
French Drain Man Certified
EnviroBotics Authorized
20+ Years Experience
700+ Projects Completed
Family-Owned NJ Business
5-Star Rated
Licensed & Insured
NJ HIC Licensed
BBB Accredited
QuikCrete Partner
French Drain Man Certified
EnviroBotics Authorized
20+ Years Experience
700+ Projects Completed
Family-Owned NJ Business
5-Star Rated
Licensed & Insured
NJ HIC Licensed
BBB Accredited
QuikCrete Partner
French Drain Man Certified
EnviroBotics Authorized

Why Homeowners Choose This Service

Stronger Than Steel
Carbon fiber has ten times the tensile strength of steel at a fraction of the weight. Once bonded to your foundation wall with structural epoxy, each strap creates a rigid reinforcement system that permanently prevents further cracking, bowing, or lateral movement.
Single-Day Installation
Most carbon fiber reinforcement projects are completed in a single working day with no excavation required. Our crew works entirely from inside your basement, so there is no disruption to your landscaping, driveway, or exterior living spaces.
Permanent Non-Corrosive Solution
Unlike steel reinforcement that can rust over time, carbon fiber is completely non-corrosive. It will not rust, rot, or degrade under any conditions. When properly installed, carbon fiber reinforcement is considered a permanent repair with a lifespan that exceeds the structure itself.
Low-Profile and Paintable
Carbon fiber straps add less than a quarter inch of thickness to the wall surface. They sit virtually flat, can be painted to match your walls, and allow framing and drywall to be installed directly over them -- making them invisible in a finished basement.
Cost-Effective Alternative
Carbon fiber wall stabilization typically costs 40 to 60 percent less than traditional excavation-based repair methods. No excavation means less labor, no heavy equipment rental, no landscape restoration, and a significantly lower total project cost.
Code-Compliant Engineering
Our carbon fiber repair systems are designed to meet or exceed New Jersey building code structural requirements. Each installation follows an engineered layout specifying strap width, spacing, and placement based on wall height, soil type, and the degree of deflection present.

Have Questions? We Are Here to Help.

Call us at (732) 281-1900 for a free consultation or keep reading to learn more about our process.

Our Proven Process

  1. 1

    Structural Assessment & Engineering

    Our structural specialist inspects your foundation walls, measuring crack patterns, wall deflection, and inward bow using laser levels and digital instruments. We document the degree of movement, identify the cause of pressure -- typically lateral soil pressure from New Jersey's expansive clay soils or hydrostatic pressure from a high water table -- and design an engineered strap layout specifying width, spacing, and anchor points.

  2. 2

    Surface Preparation & Crack Injection

    The concrete wall surface is cleaned, ground smooth, and profiled to ensure maximum epoxy adhesion. Any active cracks are injected with structural epoxy or flexible polyurethane to create a watertight seal before the carbon fiber is applied. For wet cracks, we use a polyurethane injection that expands to fill voids and remains flexible through freeze-thaw cycles.

  3. 3

    Carbon Fiber Strap Application

    Industrial-grade structural epoxy is applied to the prepared wall surface, and pre-engineered carbon fiber straps are pressed firmly into position using specialized rollers to eliminate air pockets. Each strap is anchored to the floor slab and secured to the sill plate or floor joist above, distributing lateral soil pressure across the full height of the wall according to the engineered design.

  4. 4

    Curing, Inspection & Warranty

    The epoxy system cures to full structural strength within 24 to 48 hours. We inspect every strap for proper bond integrity, verify anchor connections, and confirm that the installation matches the engineered specifications. You receive a written structural warranty, a detailed installation report, and documentation suitable for municipal permit compliance and future property transfers.

Frequently Asked Questions

Reinforce Your Foundation — No Excavation Required

High-strength carbon fiber repair is completed in a single day with no mess and no major disruption. Get your free written estimate today.

(732) 281-1900

Licensed & Insured | Free Estimates | No Obligation

Call Now